<ruby id="zznnz"><output id="zznnz"><var id="zznnz"></var></output></ruby>

      <th id="zznnz"></th>

              <p id="zznnz"></p>

                <output id="zznnz"><ins id="zznnz"></ins></output>

                  Your location:Home > Technical > Technical

                  Technical

                  What are the main points of polishing?

                  Publisher: Administrator Date:2023-01-07

                  1. Countermeasures for orange peel effect on the surface: reduce the polishing pressure and use larger oilstone or wood strip with gypsum. Use soft felt, polishing cloth and diamond paste. Reduce the sand number difference between grinding and polishing processes. Check whether the hardness of the cast die is correct.

                  2. Some surfaces are pulled out or there are surface fine pinholes. Countermeasures: Check whether the hardness of the cast die is correct. Reduce the sand number difference between grinding and polishing processes. Use only diamond paste 6 mm and finer. Use ordinary polishing abrasives thicker than 6 mm. The final optical mirror surface is polished by hand using high-quality paper towels and drilling gypsum Kemet 1-KD-C2.

                  3. The polished surface is not smooth enough Countermeasures: If possible, KEMET brand polishing series can be used, or GESSWEIN brand flat oilstone can be used to level the surface; Try to use the largest area of sandpaper, wood or oil stone.

                  4. Countermeasures for uneven polishing of inner hole: pre grinding and fine turning
                  CopyRight ? 2022 Dongguan Sainko Machinery Technology Co., Ltd. All Rights Reserved.    粵ICP備12086967號
                  无码免费婬AV片在线观看_看全色黄大色大片免费久久久_最新无码人妻在线不卡百_中文字幕无码电影